## 1. Precise claim and assumptions
The supporting text establishes the following statement:
> For a family of **classical, linear, two-degree-of-freedom systems**, adding one positive spring through an ideal lever strictly increases both undamped normal-mode frequencies, reduces the **equilibrium variance of \(x\)** by one third, and increases the static susceptibility of \(x\) to equal forces on both coordinates by a factor that is unbounded across the family.
The assumptions needed are:
- The coordinates have equal, unchanged masses. Set those masses and the original \(x\)-stiffness to one by choosing units.
- The original stiffness matrix is
\[
K_0=\begin{pmatrix}1&0\\0&a^2\end{pmatrix},\qquad 00\). The noise is measured about the force-shifted mean.
- “Noise reduced by one third” means **variance**, not root-mean-square displacement or a noise spectral density.
- “Without bound” means as the design parameter \(a\to0^+\), not infinite response in any fixed stable device.
- The harmonic model and ideal lever are assumed valid over all required displacements.
Those qualifications matter.
## 2. Check and independent derivation
### Stiffness matrix and equilibrium covariance
The spring adds
\[
\Delta K=
\begin{pmatrix}1&-a\\-a&a^2\end{pmatrix}
=vv^T,\qquad v=\begin{pmatrix}1\\-a\end{pmatrix}.
\]
Thus it is positive semidefinite, and
\[
K=K_0+\Delta K
=\begin{pmatrix}2&-a\\-a&2a^2\end{pmatrix}.
\]
Its determinant is \(3a^2>0\), and its inverse is indeed
\[
K^{-1}=
\begin{pmatrix}
2/3&1/(3a)\\
1/(3a)&2/(3a^2)
\end{pmatrix}.
\]
For a classical quadratic system with force vector \(F\),
\[
\langle q\rangle=K^{-1}F,\qquad
\operatorname{Cov}(q)=k_BT K^{-1}.
\]
Therefore, initially,
\[
\langle x\rangle_0=f,\qquad \operatorname{Var}_0(x)=k_BT,
\]
whereas afterward,
\[
\langle x\rangle=f\frac{2+1/a}{3},
\qquad
\operatorname{Var}(x)=\frac23 k_BT.
\]
These calculations are correct.
### Independent derivation without matrix inversion
The loaded potential is
\[
V=x^2+a^2y^2-axy-fx-fy.
\]
Static force balance gives
\[
2x-ay=f,\qquad 2a^2y-ax=f.
\]
Eliminating \(y\),
\[
y=\frac{x}{2a}+\frac{f}{2a^2},
\]
and hence
\[
\frac32x=f+\frac{f}{2a}.
\]
Thus
\[
\boxed{\langle x\rangle=f\frac{2+1/a}{3}}.
\]
For the fluctuations, complete the square:
\[
V=
a^2\left(y-\frac{ax+f}{2a^2}\right)^2
+\frac34x^2
-f\left(1+\frac{1}{2a}\right)x
-\frac{f^2}{4a^2}.
\]
Integrating over \(y\) leaves a Gaussian distribution for \(x\) with effective stiffness \(3/2\). Consequently,
\[
\boxed{\operatorname{Var}(x)=\frac{k_BT}{3/2}=\frac23k_BT}.
\]
This independently reproduces both results.
### Normal-mode frequencies
With unit masses, the new squared frequencies are the eigenvalues
\[
\lambda_\pm=1+a^2\pm\sqrt{1-a^2+a^4}.
\]
The original squared frequencies, in ascending order, are \(a^2\) and \(1\). For \(0 In an ideal classical two-coordinate model, one passive spring can raise both normal-mode frequencies and reduce one coordinate’s equilibrium displacement variance by one third, while its static response to equal forces on both coordinates grows without bound as an auxiliary stiffness tends to zero.
{"verdict":"correct with caveats","novelty":"special case or variant of known results","fair_summary":"partly","confidence":5,"one_line":"The idealized construction is mathematically correct, but the one-third reduction concerns variance, and unbounded uniform-load response requires a singular family with an increasingly soft auxiliary coordinate."}